對于消費者來說，手提袋基本的功能要牢固耐用。但是對于商家或者印刷廠來說，在手提袋印刷的時候會遇到各種問題。今天濟南手提袋制作廠家就跟大家說說遇到這些問題時，我們應該如何！

For consumers, the basic function of handbag should be firm and durable. But for businesses or printing plants, they will encounter various problems when printing handbags. Today, Jinan handbag manufacturer will tell you how to solve these problems!

手提袋印刷因為水墨為純水性系統，不要將水墨與醇性墨和溶劑型油墨混合運用或在墨中加入有機溶劑，避免導致印刷質量問題。

For handbag printing, since ink is a pure water-based system, do not mix ink with alcohol ink and solvent based ink or add organic solvent to the ink to avoid printing quality problems.

水墨宜存在室內，室溫在5℃—50℃攝氏度。

Ink should be stored indoors at 5 ℃ - 50 ℃.

運用時，應用攪拌棒將水墨在桶中攪勻，丈量其粘度后倒人墨槽。粘度若過高或過低，可以加稀釋劑或增稠劑進行調理。

When using, stir the ink in the bucket with a stirring rod, measure its viscosity and pour it into the ink tank. If the viscosity is too high or too low, add thinner or thickener for conditioning.

印刷過程中因為水的蒸發效果，會導致水墨粘度升高和PH值下降，PH值應控制在8.5—9.5之間，若超出此范圍，可用PH安穩劑進行調理，保持粘度和PH值的安穩。

Due to the evaporation effect of water during printing, the viscosity of ink will increase and the PH value will decrease. The PH value should be controlled between 8.5 and 9.5. If it exceeds this range, it can be conditioned with PH stabilizer to maintain the stability of viscosity and PH value.

一般情況下，水墨適于手提袋印刷高速印刷，低速印刷時若遇到枯燥速度太快或印刷效果欠佳的情況，可增加必定比例的慢干劑。

Generally, ink wash is suitable for high speed printing of handbag printing. If the drying speed is too fast or the printing effect is poor during low speed printing, a certain proportion of slow drying agent can be added.

印刷結束后應將剩下水墨搜集回相應的原裝桶中或?qū)⒛鄣纳w子蓋嚴，以備下次運用，謹防因為水的蒸發導致水墨表面結膜變稠乃變干。

After printing, the remaining ink should be collected back into the corresponding original barrel or the cover of the ink tank should be tightly covered for the next use, to avoid the thickening or even drying of the conjunctiva on the ink surface due to the evaporation of water.

水墨的印刷適性受印刷條件承印物的表面特性環境溫濕度；水墨存放時間長短等客觀條件的影響，因此在使用水墨時，需要用一些助劑對水墨做細微調整以獲得佳印刷效果。

The printability of ink is affected by the surface characteristics of the substrate, ambient temperature and humidity; Due to the influence of objective conditions such as the storage time of ink, when using ink, it is necessary to use some additives to make minor adjustments to the ink in order to obtain a good printing effect.

此外手提袋印刷后殘留在印刷設置上的墨在其未完全枯燥前可用清水沖刷，無法用清水洗凈的墨可用清洗劑進行清洗。關注我們http://775828.cn，了解更多相關事項！

In addition, the ink left on the printing setup after the handbag is printed can be washed with clean water before it is completely dry, and the ink that cannot be washed with clean water can be washed with detergent. Follow us http://775828.cn , learn more about it!