手提袋印刷是印刷行業中的一個主要的發展方向。雖然制作的過程非常的簡單，但是還是有很多需要注意的細節，下面濟南手提袋印刷廠家為您解說。

Handbag printing is a major development direction in the printing industry. Although the production process is very simple, there are still many details that need to be paid attention to. The following Jinan handbag printing factory explains for you.

1，在手提袋印刷的過程中，要注意同種油墨的使用，不要將不同性質的油墨進行混合，如果兩者無法相溶，就會影響到手提袋的質量。

1. In the process of handbag printing, pay attention to the use of the same kind of ink, and do not mix different types of ink. If the two cannot be miscible, the quality of the handbag will be affected.

2，在印刷的時候要保證油墨的性質，要避免陽光直射，也要保持室內的溫度，好是在10-26攝氏度內。

2. During printing, ensure the nature of the ink, avoid direct sunlight, and keep the indoor temperature within 10-26 ℃.

3，在進行手提袋印刷的過程中，油墨如果沒有經常性的攪拌，很容易就會出現粘結，進而就會影響到手提袋的整體呈現效果。但是也要注意不要太稀釋，那樣印刷出來的產品就會有色差，可以適當?shù)募尤朐龀韯┻M(jìn)行調節。

3. In the process of handbag printing, if the ink is not stirred regularly, it is easy to bond, which will affect the overall presentation of the handbag. But also pay attention not to dilute too much, so that the printed products will have color difference, and you can properly add thickener to adjust.

4，在印刷的過程中，也要充分的發揮出水的作用，它可有有效地控制水墨粘度，也能起到平衡ph值的作用。如果發現ph值沒有控制在8．5—9．5之間，就應該加入水或者是PH穩定劑進行調節。

4. In the process of printing, it is also necessary to give full play to the role of water, which can effectively control the viscosity of ink, and also play a role in balancing the ph value. If it is found that the ph value is not controlled between 8.5 and 9.5, water or PH stabilizer should be added for adjustment.

5，手提袋是一種高速的印刷，印刷的過程速度非常快，所以對油墨的干燥度也有著一定的要求，如果油墨的干燥速度過慢，可以適當?shù)募尤敫稍飫﹣硖嵘母稍锼俣?，如果在油墨還沒干的狀態下就進行印刷很容易就會出現版面花掉黏臟的情況，從而也會影響到整體的印刷效率。

5. Handbag is a kind of high-speed printing. The printing process is very fast, so there are certain requirements for the dryness of the ink. If the drying speed of the ink is too slow, you can properly add a desiccant to improve its drying speed. If the ink is not dry when printing, it is easy to cause the page to peel off and stick dirty, which will also affect the overall printing efficiency.

6，印刷完成后，應該進行設備的清洗，要在設備上的油墨還處于粘稠狀態的情況下清洗，這樣才能提升清洗的速度，如果無法用清水清洗的可以適當?shù)募尤胍恍┣逑磩?/div> 濟南印刷廠講解的內容  更多的內容  請咨詢公司官網http://775828.cn/