濟南印刷包裝的時候需要注意哪些方面的問題呢？墨盒方面的檢查是要做的，下面小編來為您講述下。

What problems should we pay attention to when printing and packaging in Jinan? The inspection of the ink cartridge needs to be done. Here is a short compilation to tell you about it.

有的時候由于操作者可能粗心大意，某一個墨盒里面都已經沒有了還在繼續開著設備操作，這個時候印刷出來的圖案可能有一些地方顏色就顯示不出來，這樣只能夠印刷出來報廢品，導致紙張和材料大量的浪費掉。

Sometimes, because the operator may be careless, there is no ink cartridge inside and the equipment is still running. At this time, the printed pattern may have some local colors that cannot be displayed, so that only the waste products can be printed, resulting in a large amount of waste of paper and materials.

沒開機之前一定要檢查一下墨盒里面是否還有足夠的油墨，如果墨盒已經沒有了，油墨就需要重新更換墨盒。

Before starting the machine, be sure to check whether there is enough ink in the ink cartridge. If the ink cartridge is gone, replace the ink cartridge.

初次印刷之前應該行一次試印刷，只印刷出一個產品并且檢查印刷出來的樣品是否存在質量方面的問題，比如文字或者圖案是否足夠的清晰，對比用戶提供的樣稿看一看有沒有哪些地方不符合的。

Before the initial printing, a trial printing should be carried out. Only one product should be printed and the printed samples should be checked for quality problems, such as whether the words or patterns are clear enough. Compare the samples provided by users to see if there are any discrepancies.

在檢查的時候應該在光線充足的地方進行，這樣才能夠進行仔細的對比分析。通過這些檢查操作發現初次印刷出來的產品是屬于完全符合要求的，這樣才可以繼續接下來的印刷作業。

The inspection should be carried out in a well lit place so that careful comparative analysis can be carried out. Through these inspection operations, it is found that the products printed for the first time are in full compliance with the requirements, so that the next printing operation can continue.

在這種操作的時候要注意不要總是用一些習慣性的方式來進行操作，有可能對某一個包裝進行印刷時間已經比較長了，有可能就形成了一種固定的操作手法，換了另外一種包裝如果同樣采取相同的操作手法，就很有可能導致印刷出來的東西出現問題，還有可能因?yàn)椴捎孟嗤牟僮魇址▽?dǎo)致出現工作當中的事故。

In this operation, we should pay attention not to always use some habitual methods. It is possible that a certain package has been printed for a long time, which may form a fixed operation method. If another package adopts the same operation method, it may cause problems in the printed things, It is also possible that accidents may occur in the process of work due to the same operation methods.

尤其像那種工作崗位比較單調的印刷工人在進行作業更換的時候，一定要看一看印刷的包裝產品是否已經更換了，如果產品型號已經發生了改變，那么就要在右手操作的時候更換以前的習慣性的操作。

In particular, when printing workers with monotonous jobs change jobs, they must first check whether the printed packaging products have been changed. If the product model has changed, they must change the previous habitual operations when operating with their right hands.

另外還需要注意在整個操作的過程當中，應該每隔一段時間就停機檢查一下相關的設備運行的情況，還要檢查一下紙張是否足夠，如果發現紙張足夠并且設備一切運行正常，那么就可以繼續開機進行印刷作業。更多相關內容就來我們網站http://775828.cn咨詢！

In addition, it should be noted that during the whole operation process, the machine should be shut down every other time to check the operation of the relevant equipment, and also check whether the paper is enough. If the paper is enough and the equipment is running normally, the machine can continue to be started for printing. More relevant content will come to our website http://775828.cn consulting service