At present, in the printing industry, the method to identify the size of the page moisture is generally visual inspection, which is used to determine whether the page moisture is appropriate by visually observing the brightness of the printing plate and the surface of the ink roller and whether the ink color of the printed matter has faded. In addition, Jinan Printing Factory reminds you that the size of page moisture can also be identified from the following aspects in daily production:

1．墨輥表面滯留較多的水量會有光亮的視覺感，且串墨輥與傳墨輥之間會有水珠積聚現象；

1. A large amount of water on the surface of the ink roller will have a bright visual sense, and there will be water droplets accumulation between the string ink roller and the ink roller;

2．墨輥上的油墨產生超飽和乳化量時，用墨刀鏟墨會有水分滲出。當往墨輥上加墨時，由于墨輥表面有水膜的存在，不易使油墨攪拌均勻，且輸墨輥下擺時容易出現打滑現象；

2. When the ink on the ink roller generates supersaturated emulsion, water will seep out when the ink is shoveled with the ink knife. When adding ink to the ink roller, due to the existence of water film on the surface of the ink roller, it is not easy to make the ink stir evenly, and the ink roller is prone to slip when swinging down;

3．墨斗中有細小的水珠滲出，且墨斗中可見到水珠時，說明水分過大;

3. If there are small water droplets seeping from the ink fountain and water droplets can be seen in the ink fountain, it indicates that the water is too large;

4．印刷過程中停車前后，由于墨輥與印版之間暫時處于分離狀態，水膜對油墨傳遞的阻隔作用變化，過多的水分會使印品墨色明顯變化；

4. Before and after the printing process stops, due to the temporary separation between the ink roller and the printing plate, the blocking effect of the water film on the ink transmission changes, and too much water will make the ink color of the printed matter change significantly;

5．經過壓印后的紙張，若吸收了過多的水量，則顯得軟綿無力，輸送過程中就缺乏清脆的響聲；

5. If the embossed paper absorbs too much water, it will appear soft and weak, and there will be no clear sound during the transportation process;

6．水分過多時會阻礙油墨的正常涂布，使油墨積聚在墨輥上，這樣，盡管墨輥上墨層很厚，但印品墨色仍顯得發淡；

6. Too much water will hinder the normal coating of the ink and make the ink accumulate on the ink roller. In this way, although the ink layer on the ink roller is very thick, the ink color of the printed matter still appears weak;

7．水分過大時，停機時間較長，版面水分仍不易蒸發散失；

7. If the moisture is too large, the downtime is long, and the moisture in the page is still not easy to evaporate and lose;

8．版面水分過多時，印張咬口部位印跡及空白面積大的邊緣印跡，容易呈現波浪型空虛現象；

8. When there is too much moisture in the layout, the impression at the nip of the sheet and the edge impression with large blank area are easy to show wavy emptiness;

9．水分過大時，橡皮布拖捎部位有水分滯留，過量的水分會在該處形成水珠。此外，橡皮滾筒、印版滾筒內的襯墊物也容易被水分沾濕；

9. When the moisture is too large, there is moisture retention at the rubber blanket dragging part, and excessive water will form water drops there. In addition, the padding in the rubber cylinder and the printing plate cylinder is also easy to be wetted by water;

10．印張若吸收過量的水分，水大時剝離后出現變形，引起向下曲卷，造成收紙臺收紙紊亂，以及印張四邊也容易出現卷曲現象導致收紙不齊；

10. If the printed sheet absorbs excessive water, it will deform after peeling when the water is large, causing downward curling, which will lead to disordered paper receiving at the paper receiving table, and the four sides of the printed sheet are also prone to curling, which will lead to uneven paper receiving;

11．水分過大時，印品網點空虛，叼口部位印跡呈波浪型發淡，墨色暗淡缺乏光澤感。

11. When the moisture is too large, the print dot is empty, the print on the mouth is wavy and light, and the ink color is dim and lacks luster.

印刷行業辨別版面水分大小的方法相關內容便是以上所講了，希望能夠給您幫助，當然有什么疑惑或者需求可以隨時來我們網站http://775828.cn咨詢了解！

This is how to identify the moisture content of the page in the printing industry. I hope I can help you. Of course, if you have any doubts or needs, you can come to our website at any time http://775828.cn Ask about it!