手提袋的設計制作是整個手提袋生產工藝的關鍵環節。多數濟南手提袋印刷是企業形象與商品廣告策略的延伸，因此選用的材料、裝飾的工藝和表現的形式都與紙袋的用途和功效密不可分。為此，濟南手提袋印刷公司整理了一篇文章讓你秒懂手提袋設計印刷的相關要點，大家趕緊動動手指收藏起來吧。

The design and manufacture of handbag is the key link of the whole handbag production process. Most Jinan handbag printing is an extension of the corporate image and commodity advertising strategy, so the selected materials, decoration technology and performance form are inseparable from the use and efficacy of paper bags. To this end, Jinan Handbag Printing Company has sorted out an article to let you understand the key points of the design and printing of handbags in seconds. Let's move your fingers quickly and collect it.

牛皮紙的韌性好、強度高，表面較粗糙?？埻Χ群玫g性差，用作紙袋一般需要表面覆膜。銅版紙有一定的韌性，印刷色彩豐富，但挺度比卡紙差。強調耐用性多選擇用牛皮紙，對色彩和挺度都有講究時大都采用卡紙，而需要豐富艷麗圖案效果，人們往往偏愛銅版紙。

Kraft paper has good toughness, high strength and rough surface. Cardboard has good stiffness but poor toughness. Generally, it needs to be covered with film when used as a paper bag. Coated paper has a certain toughness and rich printing color, but its stiffness is worse than that of paperboard. Kraft paper is preferred when emphasizing durability. Cardboard paper is mostly used when paying attention to color and stiffness, and rich and colorful design effect is required. People tend to prefer coated paper.

為了提高手提紙袋的品味和檔次，設計師們?cè)谟『蟊砻嫜b飾工藝上大動腦筋。燙金、UV、上光、七彩、凹凸及植絨等工藝靈活運用也使紙袋色彩明快、立體感增強，表現力更加豐富。

In order to improve the taste and grade of portable paper bags, designers have made great efforts in the post-press surface decoration process. The flexible application of processes such as bronzing, UV, glazing, multicolor, concave-convex and flocking also makes the color of the paper bag bright, three-dimensional and more expressive.

當然無論采用何種整飾工藝，設計師應考慮紙張材料的經濟利用，工藝設計的合理性。為了生產和品質管控，設計時制作一套完整清晰的作業工程圖必不可少，多數情況下產品還需要經過打樣確認。設計中的打樣既是工藝的驗證，也是客戶確認的依據、生產的標本。

Of course, no matter what finishing process is adopted, designers should consider the economic use of paper materials and the rationality of process design. In order to control production and quality, it is necessary to make a complete and clear set of operation engineering drawings during design. In most cases, the products also need to be confirmed by proofing. The proofing in the design is not only the verification of the process, but also the basis for customer confirmation and the sample produced.

手提袋設計印刷常規尺寸：大2開手提袋，正2開手提袋，大3開手提袋，正3開手提袋這幾種大小不同的尺寸如下：

Conventional size of handbag design and printing: large 2 open handbag, positive 2 open handbag, large 3 open handbag, positive 3 open handbag These different sizes are as follows:

大2開手提袋：330mm(寬)*450mm（高）*90mm（側面）

Large 2 open handbag: 330mm (width) * 450mm (height) * 90mm (side)

正2開手提袋：280mm(寬)*420mm（高）*80mm（側面）

Front 2 open handbag: 280mm (width) * 420mm (height) * 80mm (side)

大3開手提袋：250mm(寬)*350mm（高）*80mm（側面）

Large 3 open handbag: 250mm (width) * 350mm (height) * 80mm (side)

正3開手提袋：240mm(寬)*290mm（高）*80mm（側面）

Front 3 open handbag: 240mm (width) * 290mm (height) * 80mm (side)

手提袋設計印刷紙張可選用157g、200g的銅版紙。如需與較重的包裝品配套，可選用300g銅版紙或300g以上的卡紙印刷。如選用銅版紙或卡紙印刷，一般需覆膜或亞膜來增加其強度。

157g and 200g coated paper can be used for the design and printing of the handbag. If it needs to be matched with heavier packaging, 300g coated paper or more than 300g cardboard can be selected for printing. If coated paper or paperboard is selected for printing, it is generally required to cover film or sub-film to increase its strength.

此外，白牛皮紙由于其韌性強，使用，近期越來越多地應用在手提袋設計印刷制作上，通?？蛇x用120g或140g的白色或黃色牛皮紙，印刷后需過油以保護油墨不在做袋時擦臟。

In addition, white kraft paper, due to its strong toughness and environmental protection, has been increasingly used in the design, printing and production of handbags recently. Generally, 120g or 140g white or yellow kraft paper can be selected. After printing, it needs to be oiled to protect the ink from scratching when making bags.

手提袋設計印刷后需覆膜或穿繩方可成形。手袋的繩子可選用尼龍繩，棉繩或紙繩。如手袋尺寸較大時，需在繩孔處加固鉚釘以抗拉力。

The design of the handbag can be formed only after it is printed by covering film or threading rope. The rope of the handbag can be nylon rope, cotton rope or paper rope. If the size of the handbag is large, the rivet shall be reinforced at the rope hole to resist the tension.

印刷公司要求手提袋設計要簡潔大方，印刷過程中正面一般以公司的logo和公司名稱為主，或者加上公司的經營理念，不應設計的過于復雜，手提袋設計印刷對擴大銷售，樹立，刺激購買欲增強競爭力有很大的作用。更多相關事項就來我們的網站http://775828.cn咨詢了解吧！

Printing companies require that the design of handbags should be simple and generous. In the process of printing, the company logo and company name should be the main part of the front, or the company's business philosophy should not be too complex. The design and printing of handbags plays a great role in expanding sales, establishing brands, stimulating purchasing desire and enhancing competitiveness. Come to our website for more relevant matters http://775828.cn Ask about it!